According to companies’ need, we also have sales of drip that its shape and properties are written below and available to be used with Damla irrigation pipe machine.
Drippers that are set up during production from inside wall of Lateral, are one piece and have three parts. First part is the region that has small canals that provide the water entry and work as filter. Second part has labyrinth canals that lets transversal water entry on the body. Third part exists in two side of dripper and has the water exit cubbies. On each of water exit cubbies, there are two water exit hole that is holed round lateral. These holes make water outflowed.
Drippers are produced green colored in our own pipes that we produce as brand of DAMLA PLAST. Pipes can be produced with any color that company determines.
Production Machine of Damla Irrigation Pipe(16)
1. Extruder
A. Diameter of screw : 70 mm
B. Main Motor : 22 kw Ac
C. Screw and tube are made of Nitration Steel(8550). Toughened with Gase Nitration under Vacuum.(Hrc62-65 E)
Depth of toughness : 0.4 – 0.5 mm
D. Heat Regions :4x4.8 kw – Seramic Resistances + Cooling Fans + 3 Region x 1,6 kw Stainless Tape Resistance.
E. PID Heat control system
F. Computer Based Management Console (PLC)
G. Automatic Hmm Absorbent
2. Sorter System
A. Automatic Drip Charge and Limitation
B. Drip Filling Control System
C. Space between the pieces can be set with PLC system.
3. Vacuum Calibration Unite(3 Meter)
A. Vacuum Pump : 3 kw
B. Electronic Vacuum Control Unit
C. Back and Forward Movement Motor : 0,75kw
D. Control Panel is Connected to Main PLC Remote Control.
E. Water Filter.
4. Cooling Pool
A. Height : 3x4=12 mt
B. Airy Drier
5. Machine of Making Hole
A. All Pneumatic Components : Festo or Muadili
B. Number of Holes : 2
C. Holing Distance Can Be Set
6. Caterpillar Shrinking Machine
A. Shrinking Length : 1000mm
B. Double Reducer
C. Control Panel is Connected to Main Remote Control
7. Double Surrounder
A. Max. Out Diameter of Coil : 700 mm
B. Min. Inside Diameter of Coil : 330 mm
C. Width of Coul : 350 mm
D. Main Motor : 2.2 kw Ac x 3
E. Fluent Rolling with
F. Control Panel is OnBoard(PLC Control)
G. Independent Control( Rolling and Unrolling )

Extruder Line Control : Touch-Operated Screen Industrial PLC
Machine Electricity Power is 50 kw.